READY MIX PLASTER
NXTFIX mortar is a semi-premix high-quality mortar for the jointing and bonding of AAC blocks. NXTFIX mortar semi-premix consists of cement, graded sand and specialised polymers which combine to give superior strength, water retention and stability. It replaces the conventional method and material of jointing mortar which requires a 12-18 mm thickness with a revolutionary 2-3 mm joint thickness. NXTFIX mortar only requires the addition of water before application to prepare the product for use, reducing the hassle of measuring and maintaining various individual elements to create a conventional mortar.
Block Joining Mortar
NXTFIX mortar is a semi-premix high-quality mortar for the jointing and bonding of AAC blocks. NXTFIX mortar semi-premix consists of cement, graded sand and specialised polymers which combine to give superior strength, water retention and stability. It replaces the conventional method and material of jointing mortar which requires a 12-18 mm thickness with a revolutionary 2-3 mm joint thickness. NXTFIX mortar only requires the addition of water before application to prepare the product for use, reducing the hassle of measuring and maintaining various individual elements to create a conventional mortar.
FEATURES & BENEFITS
High bond strength
Special polymer imparts high adhesive strength increasing overall masonry strength & load bearing capacity.
Economical
Quantity of NXTFIX required is 3 times less than conventional mortar
Semi Premix
NXTFIX Mortar are semi-premix solutions which only require the addition of water prepare for application
No Curing Required
Due to water retention polymers, curing is not essential after application
Negligible Seepage
Due to the texture Chemical bond and properties of NXTFIX mortar, seepage water penetration through joints is negligible.
Easy Application
Reducing the hassle of mixing various raw materials, saves the wastage and ensures the higher flow ability and water retention properties.
TECHNICAL SPECIFICATION
PREPARATION AND APPICATION
Mortar Mixing
In a clean bucket, mix NXT FIX thin bed mortar in 25-30 % of water.
Mixing by Mixer or Tool
Mix first tor 5-10 minutes by hand or electrical mixer to mix homogeneously.
Reaction Time
Allow mortar to stand for 5 minutes.
Mortar Remixing
Mix again for 2-3 minutes. Now thin bed mortar is ready to use.
Mortar Spread
Mortar should be spread on all sides of block in such a way to maintain the bond thickness 2-3 mm.
Setting Time
The setting time is affected by climatic conditions, allow stand-alone time accordingly.
Clean Surface
Before application clean the surface of blocks using suitable tools like brush so that any foreign material is not held on the blocks .
Alignment
use Spirit Level and fibre hammer to remove any air gaps in between blocks for jointing and alignment.
Wet Surface
Wet the surface of blocks before applying mortar.
DND
DO not disturb the wall after application of mortar for at least 24 hours.
KNOWLEDGE BASE